Zum Hauptinhalt springen

Reverse Engineering of Kugelfischer Fuel Injection Pumps for MTU 12V652 and 16V652

Kugelfischer PSA 36 V-13.03 and PSA 38 V-13.03 – Reverse Engineering and Reproduction of Pumping Elements, Delivery Valves and Wear Components

Preserving Mechanical Fuel Injection Technology When Original Spare Parts Are No Longer Available

Maintaining and overhauling older large diesel engines is becoming increasingly challenging, particularly when essential components of their mechanical fuel injection systems are no longer available from the original manufacturer.

Precision components such as pumping elements, delivery valves and other internal wear parts are essential for the reliable operation of these injection systems. When such components become obsolete, restoring the original equipment often requires specialised engineering solutions.

At Einspritzpumpen Manufaktur NRW, we are currently working on a reverse engineering project involving mechanical Kugelfischer fuel injection pumps used in MTU 652 series diesel engines.

The project focuses on two specific fuel injection pump models:

  • Kugelfischer PSA 36 V-13.03 – MTU 12V652

  • Kugelfischer PSA 38 V-13.03 – MTU 16V652

Our objective is to reconstruct the original design and develop replacement components for these injection pumps, including new pumping elements, delivery valves, seals and other components subject to mechanical wear.

By combining precision measurement, component analysis and reverse engineering, we aim to establish the technical basis for future repair and overhaul of these injection pumps, even when original spare parts are no longer commercially available.

Technical Inspection and Analysis of Kugelfischer Fuel Injection Pumps

The first stage of our reverse engineering project involves a detailed technical examination of the existing injection pump assemblies.

This process includes identifying the original construction, evaluating individual components and documenting their condition.

The disassembly illustrated in this project shows a Kugelfischer PSA 36 V-13.03 fuel injection pump, as used in the MTU 12V652 engine.

For the MTU 16V652 engine, the corresponding injection pump version is the Kugelfischer PSA 38 V-13.03.

The original identification plate provides essential information for identifying the injection pump and determining its technical configuration.

During disassembly, the internal pumping element housings, mechanical assemblies and other relevant components become accessible for further inspection.

This detailed examination allows us to identify functional relationships, investigate wear patterns and establish the technical requirements for reproducing critical components.

Reverse Engineering of New Pumping Elements

One of the central objectives of this project is the development of replacement pumping elements.

These precision components, commonly consisting of a closely matched plunger and barrel assembly, are among the most demanding parts of a mechanical diesel fuel injection pump.

Their performance depends on several closely related characteristics, including component geometry, manufacturing tolerances, running clearances, control edges and surface finish.

Our reverse engineering process therefore focuses on:

  • Determining the original component geometry

  • Analysing critical fits, clearances and fuel-metering control edges

  • Evaluating existing wear and dimensional deviations

  • Investigating suitable materials and manufacturing processes

  • Defining the required dimensional accuracy and surface quality

A particular challenge is distinguishing between the original manufacturing dimensions and dimensional changes caused by years of operation.

Simply copying an existing, worn component would not necessarily reproduce its original characteristics.

Our objective is therefore to reconstruct the original functional geometry rather than reproduce the wear of an existing part.

This approach forms the technical foundation for the development of new pumping elements intended to restore the original operating characteristics of the Kugelfischer injection system.

Development of Replacement Delivery Valves

In addition to the pumping elements, delivery valves represent another important part of our development programme.

Delivery valves play a significant role in the hydraulic behaviour of a mechanical diesel injection system.

Their design influences the pressure conditions within the injection lines and the controlled termination of fuel delivery.

For this reason, their reconstruction requires careful analysis of the original construction and its operating characteristics.

Particular attention is given to:

  • Sealing surfaces and valve seats

  • Guiding surfaces and component alignment

  • Relevant dimensions and clearances

  • Interaction between moving components

  • Original functional characteristics

Existing original delivery valve components are examined, measured and evaluated to establish the necessary technical specifications.

The aim is to develop suitable replacement components that can be integrated into the existing Kugelfischer fuel injection pump assemblies.

Seals and Additional Wear Components

A comprehensive fuel injection pump overhaul requires more than replacing the main precision components.

Seals, supporting components and other internal wear parts must also meet the technical requirements of the original assembly.

Consequently, our reverse engineering project also includes identifying and developing suitable sealing components.

Important considerations include:

  • Original installation dimensions

  • Compatibility with the operating fluids

  • Material characteristics

  • Required sealing performance

  • Integration with existing pump components

Additional wear components may be included in the development programme following further technical assessment.

Our objective is to approach the injection pump as a complete mechanical system rather than treating individual components in isolation.

From Disassembly to Functional Testing

The reverse engineering of these Kugelfischer injection pumps follows a structured development process.

1. Disassembly and Documentation

The fuel injection pump is carefully disassembled.

Individual components and assemblies are identified, documented and evaluated according to their condition and function.

2. Precision Measurement and Technical Analysis

Relevant dimensions, tolerances, functional surfaces and mechanical relationships are examined.

Existing wear is assessed to distinguish original design characteristics from changes caused by operation.

3. Design Reconstruction and Manufacturing Preparation

The information obtained during technical analysis is used to develop the documentation and specifications required for reproducing individual components.

Material selection, manufacturing methods and critical dimensional requirements are considered during this phase.

4. Manufacturing of Prototype Components

Based on the reconstructed specifications, prototype pumping elements, delivery valves, seals and other required wear components are intended to be manufactured.

These prototype parts will provide the basis for subsequent evaluation and development.

5. Functional Testing and Validation

Following manufacture and technical inspection of the prototype components, the necessary functional tests are planned.

Depending on the technical requirements, this may include testing the assembled fuel injection system on a suitable fuel injection pump test bench.

The objective is to evaluate whether the reconstructed components achieve the required mechanical and hydraulic characteristics.

Current Project Status

The technical investigation and reconstruction of the Kugelfischer PSA 36 V-13.03 and PSA 38 V-13.03 are currently in progress.

Prototype manufacturing and functional validation form part of the planned subsequent development stages.

Further project developments and the results of future functional testing will be published on this page as they become available.

Replacement Parts for MTU 12V652 and 16V652 Fuel Injection Pumps

Many mechanical fuel injection systems were originally designed for extended service lives.

However, the availability of replacement parts does not always match the operational lifetime of the engines in which these systems are installed.

This presents a particular challenge for operators, maintenance organisations and engine rebuilders working with older MTU large diesel engines.

When critical fuel injection components are no longer available, even an otherwise serviceable injection pump may become difficult to repair.

Through precision engineering and the reconstruction of obsolete components, we are investigating ways to extend the serviceability of these mechanical fuel injection systems.

At Einspritzpumpen Manufaktur NRW, we combine practical experience in mechanical fuel injection pump overhaul with technical component analysis and reverse engineering.

Our ongoing work on the Kugelfischer PSA 36 V-13.03 and PSA 38 V-13.03 demonstrates our approach to preserving technically demanding and increasingly rare mechanical diesel injection systems.

Kugelfischer Injection Pumps for MTU 652 Engines – Technical Enquiries

Are you operating or maintaining an MTU 12V652 or MTU 16V652 diesel engine?

Do you have a Kugelfischer PSA 36 V-13.03 or PSA 38 V-13.03 fuel injection pump that requires inspection, overhaul or replacement components?

Are original pumping elements, delivery valves or other essential spare parts becoming difficult to source?

Contact us to discuss your technical requirements.

We specialise in the repair and overhaul of mechanical fuel injection systems, together with the reverse engineering and reproduction of selected obsolete precision components.

Please provide the injection pump designation, available part numbers, photographs or technical information, along with a brief description of the problem.

Based on the information provided and, where necessary, an examination of the original components, we can evaluate the available technical options for your injection pump.

Our objective is to develop sustainable repair solutions for mechanical fuel injection equipment that might otherwise become impossible to maintain due to discontinued spare parts.

Einspritzpumpen Manufaktur NRW

Mechanical Fuel Injection Pump Overhaul | Reverse Engineering | Precision Components for Large Diesel Engines

Technical enquiries: Einspritzpumpen-Manufaktur-NRW@t-online.de